VMP 1" NPT (female) high-flow intercooler bungs for 11-17 Coyote

This kit is a flow-mod for getting additional water-flow in and out of the intercooler core.  

Floating tubes not included, see related items.

• 2 of VMP-SUC017 1" short floating tube required when using VMP Upgraded intercooler core VMP-SUC050
• 2 of VMP-SUC029 1" to 3/4" short floating tube required when using the stock intercooler core

These fittings in conjunction with a properly built intercooler system can result in temps staying near ambient, or below ambient with an ICE tank, even in the most serious situations.

Recommended for supercharged cars making over 1000 RWHP or over 20psi

Includes:

• Two manifold bungs with 1" female NPT threads
• Two hold-down plates
• Necessary O-rings

Recommended fittings  (available from 3rd party suppliers):

• 1" NPT x 3/4" barb 90 degree - black plastic poly PN: HB100/075-90 for stock 3/4" lines
  https://www.zoro.com/banjo-34-barbed-x-1-mnpt-90-degree-elbow-hb100075-90/i/G2670166/
• 1" NPT x 1" barb 90 degree - black plastic poly PN: HB100-90 for use with 1" heater hose
  https://www.zoro.com/banjo-1-barbed-x-mnpt-90-degree-elbow-hb100-90/i/G2632725/