VMP Stage 1 Upgrade Package 15-18 F150 5.0L

Please select fitment

VMP Stage 1 Upgrade Package 15-18 F150 5.0L

SKU: VMP-F150JLTPACK
$699.99

$699.99

Required *
California Residents Warning!
California Residents:Proposition 65 Warning

VMP's Stage 1 Power pack for 2015-2018 F150 will wake up your F150! Included in this package is a JLT Cold air intake, SCT X4 and VMP Custom Tuning! 

Includes:

  • JLT Cold Air Intake
  • VMP Custom Tune
  • SCT X4 Tuning Device

We have extensive experience tuning a wide range of Ford Vehicles, we apply our dyno-tuning experience to all our email and mail order tunes.

Improvements from VMP custom tunes (varies by application):

  • Firmer and faster shifting for automatic trans vehicles, slightly firmer at part throttle, much firmer at WOT.
  • Removed speed limiter (do not exceed tire or driveshaft rating)
  • Safely raised rev limiter 200-400 RPM.
  • Advanced timing for improved response and power at all RPM ranges
  • Optimized air fuel ratio for more power at WOT
  • Permanently turn traction control off (specify when ordering)
  • Turn shift light off (specify when ordering)
  • Tow tunes that increase fuel economy and reduce trans temps while towing
  • Torque converter lockup at WOT for more power to the wheels
  • Optimized engine fan cooling on/off temperatures for less heat-soak
  • And much much more depending on the individual vehicle...



*There are absolutely no refunds on custom tuning*
Tuning labor is not refundable - modified vehicles can be highly variable and could have different issues that may be difficult to diagnose over the internet. We are happy to work with you to solve any issues with your vehicle but you must be able to datalog if necessary - all datalogging support is handled via email.


Important parts and tuning notice:

By ordering this tune, you agree to assume all responsibility for assuring that it is to be used for off-road and/or competition use only and is not to be used on a vehicle that is registered for use on public roads nor highways. 


Because U.S., Canadian, and other international, state or provincial laws and regulations may prohibit removal or modification of components that were installed on vehicles by Ford Motor Company to meet emission requirements or to comply with motor vehicle safety regulations applicable to vehicles manufactured for use on public roads, VMP wants you to know the following: 

Most of the parts and services offered in this online catalog are for off-road use or competition use only. Use on State and Federal Highways may be a violation of the EPA Clean Air Act. The Clean Air Act can be found at http://www.epa.gov/air/caa/. This document contains in detail what are considered to be violations of the CAA and corresponding penalties for failure to obey and should be read in full before purchasing or installing this off-road or race use only product. Ensuring that all emissions, noise/sound, and speed/use related laws are followed is the responsibility of the Buyer(s). Installation and use of this product indicates that this disclaimer has been read, acknowledged, and understood fully by both the Buyer(s) and Installer(s). The Buyer(s) assume all associated risk of the purchase. 

Emissions Notice:

Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. VMP assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of our products or services. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
We will not disable O2 sensors or CEL that stem from the lack of catalytic converters or EGR delete.

California Residents

The emissions laws and regulations of the state of California apply to all non-racing vehicles. Consequently, some parts in this catalog may legally be used in California only on a racing vehicle which will never be operated on public roads.

JLT Cold Air Intake (2015-2018 F-150 5.0L)
A JLT solution for your 2015-2018 5.0L F-150
After all of the success of our kits for the 5.0 powered Mustangs we decided to attack the pickup truck market with the same logic. Make a system that's bigger and badder than
any other current system available.

INTAKE TUBE
JLT's 2015-2018 F-150 5.0L Cold Air Intake is fully computer designed to optimize space and for best fit and finish. Large 4.5" filter inlet with radius end for smooth air flow to the throttle body
Tube measures 4" at the throttle body side in preparation for larger after market throttle bodies.

HEAT SHIELD
Retains the bottom half of the stock air box, maintains fresh air feed by doing this! We include a new top half to accept our large filter and tube.

AIR FILTER
We use only the best air filters made by S&B to our specifications. We love S&B's tapered flange design and Powerstack filtered ends. With a huge 4.5 opening on the tube we needed a huge filter. The result is a monster 4.5x6 filter.

TUNING
This intake system is NO TUNE REQUIRED.

Power gains
In our testing we have found gains to be a consistent 10-15 RWHP peak, with even more under the curve. See the dyno video below.

FINISH OPTIONS
Standard finish is an OEM looking black textured plastic or choose from painted tubes and hydro-dipped finishes that receive a special treatment so paint adheres correctly to the plastic and go through an in-depth process to remove all the texture. We then use only the best quality materials to give each tube a smooth gloss finish.

EASY INSTALL
The design, detailed instructions and online video (see below) helps make this an easy install.
Install Instructions

KIT INCLUDES:
ï½JLT Plastic Intake Tube
ï½90 degree rubber Reducer
ï½4.5x6" S&B Powerstack Air Filter
ï½Heat Shield
ï½HD Clamps & all needed hardware

MAINTENANCE 
To properly clean your oil filter, we recommend the S&B Precision II Cleaning & Oiling Kit. 
*TIP* by purchasing a 2nd air filter you can simply swap filters when it's time to clean it and not be rushed. Clean the first filter and it's ready when it's time to change again.


JLT Pre-Filters are now available for most intake kits we carry, these filters are made for us by Outerwears, these prefilters are water repellent. They will increase your filter life and cut down on your cleaning intervals! For more information check the product page here JLT Air Filter PRE FILTER

Dyno Testing!

*This product is NOT CARB (California Air Resource Board) Exempt. It is not for legal sale or use in the state of CA or any other states adopting CA emission standards and require a CA Executive Order (EO) number. Any orders placed for this item with a CA ship to address will be cancelled.

No reviews available

Be the first to Write a Review