VMP Twin Jet 69 mm throttle body for the 2018+ Ford Mustang GT.
VMP Twinjet 69mm TB for ‘18-19 5.0L Mustang & F150
Industry exclusive - works on ‘18-19 with Cobra jet intake manifold
NO ADAPTER BOX required, avoid the expense and issues
Comes assembled and tested with the factory digital electronics
Works with 18+ Mustang GT 5.0l and 18+ F150 5.0l
Twin blade design provides for excellent driveability and tunability
In a continued effort to satisfy consumers’ need for speed, VMP Performance is excited to announce the release of the VMP TwinJet 69 mm throttle body for 18+ Ford vehicles running the Cobra-Jet intake manifold.
In 2018 Ford switched over to a new electronic control system for the drive by wire throttle body. This new system used digital signals to control the throttle motor, rather than analog voltages as was done previously. VMP’s 18+ twinjet 69mm throttle body is built with the same digital electronics found on 18+ Fords (designated by a J on the motor cover instead of an F). Our throttle bodies include electronics, are tested, and set; all you have to do is bolt them onto the vehicle and load the proper tune. When a customer is left to install their own electronics on a throttle body the calibration process can be lengthy and difficult.
Previously, the only way to get a GT500 style TB to work on an 18+ Mustang or F-150 was to use an expensive and problem prone throttle body adapter box. Costing nearly $500, these boxes don’t result in a perfect translation from digital to analog, sometimes causing idle issues and failsafes. VMP’s Twinjet 69mm with native digital electronics alleviates these issues.
Includes: 6in PNP harness extension (VMP-INT006)
Weight: 5 lbs
Fits vehicles with and also see: M-9424-M50CJA Cobrajet manifold