Steeda SN95 Mustang Bumpsteer Kit (94-04)

Please select fitment

Steeda SN95 Mustang Bumpsteer Kit (94-04)

SKU: Steeda-555-8104
$169.95

FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. THE SALE, USE, OR INSTALLATION OF THIS PRODUCT MAY ALSO BE ILLEGAL NATIONWIDE UNDER THE FEDERAL CLEAN AIR ACT (42 U.S.C. § 7522(A)(3)).

Steeda SN95 Mustang Bumpsteer Kit (94-04)

If you have substantially lowered your vehicle chances are you have introduced bump steer. What is bump steer? Bump Steer is changes in toe caused by suspension movement.

Every car has bump steer, however when you lower your SN95 Mustang you increase the amount of bump steer that occurs, if this becomes excessive you will begin to notice some unwanted vehicle driving characteristics.

When you turn your steering wheel you are essentially changing the toe of the wheels to turn the vehicle. Excessive bump steer is undesirable because it introduces unwanted steering inputs which means the suspension is steering the car instead of the driver.

If your car is lowered and has tracking issues and less predictable steering behavior, you need a bump steer kit.

In addition, our bump steer kit makes a great service replacement for your worn out, high mileage outer tie rods even if you do not have excessive bump steer issues.

Pick up a bump steer kit today and refresh your outer tie rods and improve your steering.

Steeda's Bump Steer Kits will allow you to correct your bump steer geometry and can do so without requiring you to drill or modify your vehicle spindle.

Steeda Tapered Stud Advantages

  • Studs are made to the exact taper of the factory spindle, for a simple install every time.

  • Machined to exact tolerances for an exact fit.

  • Heat treated after machining to ensure hardness throughout stud.

  • Made of 4140 high-grade steel for superior strength.

Competitor Bolt Design Disadvantages

  • Requires drilling the spindle hole to a 5/8" diameter. Bit costs $17 at local Hardware Store.

  • Basic grade 8 bolt that can vary in strength.

  • Must drill spindle to bolt size, will have "play" or "slop".

  • No steps taken to ensure material hardness.

Product Benefits

  • Wide range of adjustment

  • Does not require spindle modification for fitment or adjustment

  • Direct replacement installation

  • High quality construction and fit

No reviews available

Be the first to Write a Review