Due to overwhelming demand we are currently on back order for this product. We are taking backorders and will fill all new orders asap.

PBH has put together a kit to help put the 6R80 6 speed automatic transmission behind any Coyote or GT500 engine swapped build. Using a factory pcm with a custom flash we can control both engine and transmission in one module, no need for any secondary controllers that might have some limitations.

In the pack you will receive the PCM, PBH 6R80 body harness, both o2 sensors, gas pedal, fuse box, mass air meter, and detailed instructions.

The PBH 6R80 body harness will give installers and builders the ability to not only use the 6R80, but to use it to full factory potential. We also left wiring leads for anyone who would like to add select shift buttons, cruise control, electric steering, and oil pressure sender. You also get trigger wires for fuel pump and cooling fans so the factory computer can control them as well. The fuse block is detachable to make wiring installation easier.

The pcm supplied in the kit is a 2013-14 Auto GT Mustang unit. This allows us to use the select shift option just like factory. The computer will come with a custom flash to allow start up and custom tuning.

Download Product Instructions

6R80-HARNESS-V2-WITH-FITTINGS.PDF

Compatibility:

*2011 2012 2013 2014 2015 2016 2017 Coyote, Roadrunner, and F150 Coyote V8 engines

*2015 “ newer engines will require 11-14 engine harness, coils, and 11-14 throttle body for compatibility.

*2007 2008 2009 2010 2011 2012 2013 2014 GT500 V8 engines with 11-14 model engine harness only

*2011-newer Mustang 6R80 transmissions

*2011-newer F150 6r80 transmissions

Whats in the box:

*PBH 6R80 body harness

*PCM

*O2 sensors

*Mass air flow meter

*Gas pedal(fly by wire)

Additional Options: