07-12 GT500 Pulley, Idler, CAI kit installed & Dyno tuned
Want us to install this for you? Purchase this product and reach out to Sales to schedule your install! Price includes installation and dyno tune by the VMP Performance team.
The JLT 123MM Cold Air Intake package is a great first step modification for your GT500.
If you have a stock Shelby and are looking for more power this is the best place to start. This package offers great bang for your buck. The power package will raise boost 3-4 PSI and add up to 100-130rwhp on your shelby! Flywheel HP from stock of 500HP to 625-650HP! We also offer free tune updates for any future modifications purchased from VMP.
- SCT handheld tuner Custom Programmed by VMP
- JLT 123MM Cold Air Induction system (Paint match and Hydrocarbon finishes are made to order, potential 1-3 week delay)
- 2.50" Supercharger Pulley to raise boost 3-4psi
- 90MM idler pulley to take up slack in the belt (stock belt retained)
- Optional *VMP Pulley Removal and Installation Tool
- Optional: VMP Twin Jet 67mm Throttle Body Upgrade
We only use the highest quality parts in our packages. Each custom tune is written by a VMP tuning team member and our pulleys are designed to fit perfectly the first time.
The Intake and Tune alone result in a 60-80RWHP and 60-80RWTQ gain on 07-09 and 30-50RWHP and 30-50RWTQ on 10+. In conjunction with the smaller pulley total gains will be 100-130RWHP and 100-130RWTQ on 07-09 and 50-70RWHP and 50-70RWTQ on 10+ (measured at wheels). Most cars will dyno 525-550RWHP depending on weather conditions with intake, pulley, and tune installed. 10+ start off higher due to the more aggressive factory calibration and factory intake, but end up in a similar place as 07-09 once these modifications are performed. The pulley may be installed at a later time, the tune will automatically adjust for it. Up to 3 custom tunes can be loaded onto your tuner, select 93-92, 91, race fuel, or Torco octane booster tune.
If you have any other mods note them at the time of ordering so they can be taken into account, such as long-tube headers or different rear end gears.
If you have special octane requirements let us know and we can create a tune for you. We have shipped our tunes all over the world and are familiar with the fuels available in Europe and other regions such as 95 and 98 RON.
The SCT X4 flash tuner is warranty friendly. The flasher saves your stock tune the first time you use it. You are able to flash the vehicle back to stock at any time. There is no way for the dealer to know that the vehicle was flashed.
Each SCT Flasher comes loaded with user adjustable options. You are able to change parameters such as tire size and rear end gear ratio yourself.
The flasher is fully re-programmable, new tunes can be emailed as you modify the vehicle.
*We highly recommend the use of the VMP Ultimate Pulley Removal and Installation tool. It is a specialized tool made specifically for this job, most Ford dealers and mechanics will not normally have such a tool. They may have other tools that will work, but the time spent and the damage caused is often not worth the trouble. Our tool is designed to take the stock pulley off without damaging it, and allows for easy installation of the new pulley. Our installation tool uses a large bearing to allow the new pulley to be installed on center and with relative ease (due to lack of friction). No heat is required when using our tool. We can not guarantee the installation of our pulley when other tools are used.
Important parts and tuning notice:
By ordering this tune, you agree to assume all responsibility for assuring that it is to be used for off-road and/or competition use only and is not to be used on a vehicle that is registered for use on public roads nor highways.
Because U.S., Canadian, and other international, state or provincial laws and regulations may prohibit removal or modification of components that were installed on vehicles by Ford Motor Company to meet emission requirements or to comply with motor vehicle safety regulations applicable to vehicles manufactured for use on public roads, VMP wants you to know the following:
Most of the parts and services offered in this online catalog are for off-road use or competition use only. Use on State and Federal Highways may be a violation of the EPA Clean Air Act. The Clean Air Act can be found at http://www.epa.gov/air/caa/. This document contains in detail what are considered to be violations of the CAA and corresponding penalties for failure to obey and should be read in full before purchasing or installing this off-road or race use only product. Ensuring that all emissions, noise/sound, and speed/use related laws are followed is the responsibility of the Buyer(s). Installation and use of this product indicates that this disclaimer has been read, acknowledged, and understood fully by both the Buyer(s) and Installer(s). The Buyer(s) assume all associated risk of the purchase.
Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. VMP assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of our products or services. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
The emissions laws and regulations of the state of California apply to all non-racing vehicles. Consequently, some parts in this catalog may legally be used in California only on a racing vehicle which will never be operated on public roads.