Home > Performance Parts > Gauges & Wideband >

Dynojet WBC2 - Air/Fuel Ratio Meter - Base unit, sensor & gauge
Dynojet WBC2 - Air/Fuel Ratio Meter - Base unit, s


 
Suggested Retail Price: $319.00

Product Code:
15-7003PAK


Select Gauge*:
  

Qty:  
Description
 

Package with WBC and your choice of guage.

Wide Band 2 Product Details

This wideband air/fuel ratio sensor installs in your existing O2 bung (rear O2 bung recommended) and gives you a real time air/fuel reading on provided gauge. Great for monitoring engine performance and safety. Ideal air/fuel ratio for a boosted engine is 11.5 to 12:1 under heavy load/throttle (while in boost). It is normal for the air/fuel to move between 14 and 16 at idle and light load.

Catalytic converters may dampen and slow the reading but WOT measurements will still be accurate to a tenth. If you wish to weld in a seperate bung, one is included.

The Wide Band 2 Includes the Following:
  • 1 Wideband 2 Module
  • 1 Data Acquisition Cable (optional with 15-7011 kit)
  • 1 Bosch LSU 4.2 Wide Band Oxygen Sensor
  • 1 Oxygen Sensor Cable
  • 1 Oxygen Sensor Weld Bung, Plug, and Copper Washer
  • 2 Dynojet CAN-Link Port Seal
  • 3 Wire T-taps
  • 1 Terminal Strip Plug
  • 2 Dual Lock Strips
  • 1 Alcohol Swab
  • 3 Zip Ties
  • 1 Warranty Registration Card
  • 2 Dynojet Decals
  • 1 Installation Instructions
  • Choice of Gauge
Wide Band 2 Options:
Wide Band 2 Technical Features:
  • 0-5v Calibrated Analog AFR Output (Connects to external data acquisition device)
  • One wire RPM hookup
  • 0-5v analog input (TPS, MAF, boost, etc )
  • Built-in Sensor Condition Test
  • Durable enclosure and wire sheathing for years of trouble-free operation
  • Dynojet CAN-Link communication , allows for expansion options
Wide Band 2 Product Specifications:
Requirement 11.5 - 15 VDC, 3A
Dimensions 2.80""w x .56""h x 1.488""d
Range: .68 lambda - ambient air

Inputs:
Analog: 0-5 VDC
Digital Square wave, 0 - 12 V nominal (coil (-) tachometer signal)

Outputs:
Gauge Driver 0 - 5 VDC analog
Calibrated AFR 0 - 5 VDC analog
Simulated Narrow Band
Dynojet CAN-Link (accessory cable required)